|
6. EPO port (emergency power off)
A customer-supplied switch located remotely can be used to open
the EPO connection and allows UPS output receptacles to be
switched off. Since the EPO shuts down the equipment
immediately, orderly shutdown procedures are not followed and
not by any power management software. The UPS will have to be
manually restarted in order to regain power to the outlets.
Transient protector isolates your modem, fax machine, and other
electronic equipment from back door power surges.
7. Network Transient protector (700 - 3000 VA)
The network transient protector, located on the back panel, has
both IN and OUT jacks, and houses a single RJ45 (10BaseT)
network connector. Connect the input connector to the jack
labeled IN, and the output connector to the jack labeled OUT.
8. Load segments (700 - 3000 VA)
The power management software controls the sets of receptacles
known as load segments which provides organized shutdown and
startup of the equipment. Less critical equipment can be turned
off during power outages saving battery power for critical
loads. The power management software manual has more details
regarding this.
The load group status can be viewed from the LCD display and can
be changed if necessary. These load segments are usually handled
with the UPS management software. Refer to chapter 5.2 regarding
the two load segments that come with each model.
Software and Communications Options
USB port (optional) allows UPS to communicate with Windows
98/ME, and XP computers
RS232 Port (standard) for interface with power management
software
SNMP/Web card (optional) adds direct control and monitoring
capabilities in SNMPbased networks Ability to monitor UPS
status and meters through web browser interface.
Relay card (optional) adds integration to industrial
environment and building management systems, shutdown
for IBM AS/400.
5
TOP
Powercom UPSMON suite
The industrys most comprehensive software bundle, the Powercom
Software Suite, is free and included with every Powercom
Vanguard UPS.
UPSMON plus Wizard guides you through software selection and
installation
UPSMON plus Features the following power management software:
Automatic shutdown.
User notification of power events.
UPS power events log.
Automatic reboot.
Broadcast power abnormal status.
Smart save file.
Scheduled system shutdown/reboot.
UPS Battery low warning.
Realtime graphical display.
Battery level display.
Power quality data log.
Printing power events list.
Graphic display by meter.
Support Windows NT Service and start UPS monitoring software
before user log in under Windows
95/98/2000/NT/ME/XP.
5
TOP
1
| 2
|
3
|
|
